Especificações Técnicas do Powerware 9120 (América do Norte)

Guia de Seleção de Modelos

Optional EBMs

Battery Runtimes

Available Options

Electrical Input
Nominal Voltage	120 Vac and 230 Vac; Model Selection Guide for user-selectable voltages
Input Voltage Range	120V: 80 –144 Vac 230V: 120/140/160-276 Vactd>
Input Power Factor	>.95%
Operating Frequency	50/60 Hz, Auto-sensing
Frequency Range	45 - 65 Hz
Input Protection	Fuse or circuit breaker
Electrical Output
On Utility Voltage Regulation	+/-2% of nominal
On Battery Voltage Regulation	+/-3% of nominal
Nominal Output Voltage	Same as selected input voltage
Output Voltage Waveform	Sine Wave
Output Voltage Distortion	<3%THD
Output protection	Electronic overload sensing, and circuit breaker protection
Efficiency	Online Mode:>86%; Hi-Efficiency Mode:>90%
Battery
Internal Battery type	Sealed, lead-acid; maintenance free
EBM Battery Type	Sealed, lead-acid; maintenance free
On Battery Runtime	See Battery Runtimes
Battery Replacement	Hot-swappable internal and external batteries
Recharge Time	<4 hours to 90%capacity
Start-On-Battery	Allows start of UPS without utility input
Communications
User Interface	LCD status screen
Audible Alarms	UPS alarm conditions, including: On-Battery, Low Battery, Overload, UPS Fault
Network transient Protector	In and out jack for all models. UL497A tested
REPO Port	Meets NEC code 645-11 intent and UL requirements
Communications	One RS232 Serial Port; One Communications Slot; One USB Port
Communications cable	6-foot communications cable included
Power Management Software	Powerware Software Suite CD
General
Topology	True online, double-conversion
Diagnostics	Full system self-test on power up
UPS Bypass	Automatic on Overload or UPS failure <4ms
Transfer Time to battery	0 ms
Dimensions and Weights	See Model Selection Guide
Overload Capacity	125% for 10 minutes before transfer to bypass; 150% for 10 seconds before transfer to bypass
Environmental and Safety
Safety Certifications	UL1778;cUL22.2 NO.107.1
EMI Compliance	FCC Part 15, Class B (700-1500), Class A (2000-3000) 230 V, EN 50091-2 Class B (700-1500), Class A (2000-3000)
Operating Temperature	0 to 40 C (32 to 104 F)
Storage Temperature	-15 to 50 C (5 to 122 F)
Storage Temperature	0o to 25o C (32o to 77o F)
Relative Humidity	0%to 95%non-condensing
Immunity	EEE C62.41, IEC 61000-4 -2, -3, -4, -5
Network Transient Protector	UL497A
Audible Noise at 1 meter	700-1000 VA: <45dB;1500 VA <50dB; 2000-3000 <52dB
Altitude	3000m (10,000 ft) without deteriorating
Note: Due to continuing product improvement programs, specifications are subject to change without notice.

Model Selection Guide

Model Number	Power Out (VA/Watt)	Input/ Output Voltage (Vac)	Frequency (Hz)²	Input Connection³	Output Receptacles⁴	Dimensions (HxWxD) in/mm	Weight (lb/kg)
120 Vac Models¹
PW9120 700	700/490	120	50/60	5-15P	(4) 5-15R	9.6 x 6.2 x 16.2/ 243 x 158 x 412	29/13.2
PW9120 1000	1000/700	120	50/60	5-15P	(4) 5-15R, (2) 5-20R	9.6 x 6.2 x 16.2/ 243 x 158 x 412	35.5/16.1
PW9120 1500	1500/1050	120	50/60	5-15P	(4) 5-15R, (2) 5-20R	10.8 x 6.7 x 17.5/ 275 x 170 x 444	46.5/21.1
PW9120 2000	2000/1400	120	50/60	5-20P	(6) 5-20R	14.2 x 8.6 x 18.6/ 361 x 217 x 472	82/37.2
PW9120 3000	3000/2100	120	50/60	L5-30P	(4) 5-15R, (2) 5-20R (1) L5-30R	14.2 x 8.6 x 18.6/ 361 x 271 x x 472	89/40.5
PW9120 3000h	3000/2100	120	50/60	Hardwired	Hardwired	14.2 x 8.6 x 18.6/ 361 x 271 x x 472	89/40.5
208 Vac Models
PW9120 3000	3000/2100	208	50/60	L6-20P	(2)L6-15R, (1)L6-20R, (1)L6-30R	14.2 x 8.6 x 18.6/ 361 x 217 x 472	89/40.5
230 Vac Models⁵
PW9120 700i	700/490	230	50/60	IEC-C14	(4)IEC-C13	9.6 x 6.2 x 16.2/ 243 x 158 x 412	28/12.6
PW9120 1000i	1000/700	230	50/60	IEC-C14	(4)IEC-C13	9.6 x 6.2 x 16.2/ 243 x 158 x 412	34/15.3
PW9120 1500i	1500/1050	230	50/60	IEC-C14	(4)IEC-C13	10.8 x 6.7 x 17.5/ 275 x 170 x 444	44/19.8
PW9120 2000i	2000/1400	230	50/60	IEC-C14	((4)IEC-C13, (1)IEC-C19	14.2 x 8.6 x 18.6/ 361 x 217 x 472	81.6/37
PW9120 3000i	3000/2100	230	50/60	IEC-C20	(4)IEC-C13, (1)IEC-C19	14.2 x 8.6 x 18.6/ 361 x 217 x 472	85/38.5
Optional Extended Battery Modules (EBMs)
PW9120 BATT 700	-	-	-	Standard Connector	-	9.6 x 6.2 x 16.2/ 243 x 158 x 412	31/14
PW9120 BATT 1000	-	-	-	Standard Connector	-	9.6 x 6.2 x 16.2/ 243 x 158 x 412	44/20
PW9120 BATT 1500	-	-	-	Standard Connector	-	10.8 x 6.7 x 17.5/ 275 x 170 x 444	57/26
PW9120 BATT 2000	-	-	-	Standard Connector	-	14.2 x 8.6 x 18.6/ 361 x 217 x 472	110/50
PW9120 BATT 3000	-	-	-	Standard Connector	-	14.2 x 8.6 x 18.6/ 361 x 217 x 472	110/50

1 Also user-selectable for 100, 110, and 127 Vac.
2 Automatic frequency selection.
3 120V models have 6-ft. attached line cord. 230 V models have 6-ft. detachable line cord.
4 Divided into 2 Load Segments (receptacle groups).
5 Also user-selectable for 220 and 240 Vac

Battery Run Times (in minutes full load/half load)

VA	Standard Internal Battery	1 EBM	2 EBMs	3 EBMs	4 EBMs	5 EBMs
700	7/18	34/70	64/140	-	-	-
1000	7/18	36/80	66/155	-	-	-
1500	7/18	29/67	56/130	-	-	-
2000	12/34	49/107	93/195	140/310	192/403	240/504
3000	6/15	30/70	57/128	87/191	120/264	148/325

Up to 2 EBMs can be connected to 700/1000/1500 VA models and up to 5 EBMs can be connected to 2000/3000 VA models.Run time chart provides typical information.Run times are approximate and may vary with equipment,configuration,battery age,temperature,etc.

Available Options

Order Number	Description
IPK-0329	ConnectUPS-BD SNMP/WEB Card
1014018	AS/400 Relay Card